Camera & Photo

Bob Lin Photography services

Real Estate Photography services 






Internet TV

SmartPhone

Tablets

Others
How to install Windows 8 on Acer Iconia tab W500P - Step by step with Screenshots
  1. Download the 32-bit Windows 8 ISO and copy the files to a USB drive. Note: if you install 64-bit Windows 8 on the Acer Tablet, some software may not work properly, for example If you had installed the 64-bit version of Windows 8 Developer Preview, the G-sensor will not work as the driver on the Acer website is only for 32-bit versions of Windows.
  2. Run Windows USB/DVD download Tool by following this post: Using Windows USB/DVD download tool
  3. Boot the Tablet to BIOS settings by following this post: How to access BIOS Settings in Acer Iconia Tab
  4. Change and save the boot order to boot from the USB.
  5. Connect a USB drive to the tablet and reboot the tablet.
  6. The computer boots into Windows 8 setup from the USB drive.
  7. Follow this article to install Windows 8.

    Windows 8 How to

  8. Windows 8 automatically installs all the drivers, except for the Device Control, Bluetooth and the G-Sensor. You can download these drivers from the Acer website.


This web is provided "AS IS" with no warranties.
Copyright © 2002-2019 ChicagoTech.net, All rights reserved. Unauthorized reproduction forbidden.