How to connect phone with Imaging Edge to Sony A1 Camera

Step 1: On Sony A1 Camera.

  1. Go to Network>Smartphone connection>Connection.
  2. The scan code popup.

Step 2: On Phone.

  1. Run Image Edge.
  2. If this is you first time to connect the phone to Sony Camera, tap Camera Connection/Registration.
  3. Tap Register New Camera.
  4. Scan the code on Sony Camera.

Using NFC

  1. Install and update the Imaging Edge Mobile app.
  2. Turn on the smartphone’s NFC.
  3. On the camera, navigate to Menu > Network > Smartphone Connect > Smartphone Connection > On.
  4. Touch the smartphone to the camera for 1–2 seconds. 

Using a QR code

  1. On the camera, navigate to Menu > Network > Smartphone Connect > Connection to display the QR code.
  2. Open the Imaging Edge Mobile app and select Connect with a new camera.
  3. Scan the QR code on the camera.
  4. Select OK when prompted to connect. 

Additional tips

  • The camera’s SSID and password are registered to the smartphone after scanning the QR code.
  • If the smartphone is connected to a VPN, it may interfere with the connection to the camera. Disabling the VPN may help.
  • The Imaging Edge Mobile website has instructions for remote shooting specific to the camera model

Published by

Bob Lin

Bob Lin, MS-MVP, MCSE & CNE Data recovery, Windows OS Recovery, Networking, and Computer Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com