Situation: The client has setup Wireless and Wired LAN on his Sony A1 camera.
He can ping the Sony camera by IP address and see it under network.
Resolution: turn on network discovery or disable Firewall for a test.
Situation: The client has setup Wireless and Wired LAN on his Sony A1 camera.
He can ping the Sony camera by IP address and see it under network.
Resolution: turn on network discovery or disable Firewall for a test.
This article will show you how to transfer images from Sony A7R II camera to mobile devices using Wireless and Imaging Edge Mobile. You may have two options to transfer images from Sony A7R II to phone. 1. Enable Smartphone Connect on Sony A1 camera. 2. Select images to be sent.
Step 1: Enable Smartphone Connect on Sony A7R camera
Option 1: Send to Smartphone
1. On Sony A7R camera, go to Wireless>Send to Smartphone, and then press Enter.
2. Select on Smartphone, and then press Enter to provide WiFi info or go to step 2.
Option 2: Select images to be sent 1. Press the (Playback) button to enter playback mode.
2. Press Send key, and then select images to be sent
3. It shows Sony A7R II WiFi info.
Step 2: Run Imaging Edge Mobile to connect mobile device to Sony A7R II camera WiFi
1. Install and open Imaging Edge Mobile on the phone
2. Tap Start to connect the Sony Camera in Camera List, DIRECT-yVEQ-ILCE-7RM2 in our example.
3. If you have connected to the Sony Camera WiFi before, go to the Phone Settings>Internet to re-connect to the Sony WiFi.
Otherwise, select Connect using Enter camera password.
4. Select Sony A7R II WiFi and enter the password.
5. Tap OK when Scanning completed.
6. Tap on Connect when Connect to device popup.
7. Tap OK when “You cannot copy HEIF image…” popup.
Step 4: Transfer images to mobile device
1. Selecting images you want to transfer. Tap Send icon.
2. It starts to Copying…
3. Tap OK when Items copies popup.
4. Tap OK to Disconnected after transfer.
Please view this step by step video:
Please view this step by step video:
This article will show you how to transfer images from Sony A1 camera to mobile devices using Wireless and Imaging Edge Mobile. There are 4 steps: 1. Enable Smartphone Connect on Sony A1 camera; 2. Select images to be sent; 3. Setup mobile device connecting to Sony A1 camera WiFi; 4. Transfer images to mobile device.
Step 1: Enable Smartphone Connect on Sony A1 camera
1. On Sony A1 camera, go to Network>Smartphone Connect.
2. Make sure the Smartphone Connect is turn on.
Step 2: Select images to be sent
1. Press the (Playback) button to enter playback mode.
2. Press Send key, and then select images to be sent
3. Sony Camera WiFi info shows up with QR Code.
Alternatively, press Delete button to show Sony A1 WiFi info.
Step 3: Run Imaging Edge Mobile to connect mobile device to Sony A1 camera WiFi
1. Install and open Imaging Edge Mobile on the phone
2. Tap Start to connect the Sony Camera in Camera List, ILCE-1 in our example.
3. If you have connected to the Sony Camera WiFi before, go to the Phone Settings>Internet to re-connect to the Sony WiFi.
Otherwise, select Connect using the camera QR Code or Enter camera password.
4. Scan the QR Code on the Sony Camera or select Sony A1 WiFi and enter the password.
5. Tap OK when Scanning completed.
6. Tap on Connect when Connect to device popup.
7. Tap OK when “You cannot copy HEIF image…” popup.
Step 4: Transfer images to mobile device
1. Selecting images you want to transfer. Tap Send icon.
2. It starts to Copying…
3. Tap OK when Items copies popup.
4. Tap OK to Disconnected after transfer.
Please view this step by step video:
To transfer images on Sony A7RII camera, one of options is through WiFi connection with mobile devices. This article will show you how to configure Sony A7R II camera to connect a WiFi network.
1. Go to Menu>Wi-Fi>Access Point Set. and then press Enter on Control wheel.
2. On Access Point Set, select the WiFi you want to use, Chicagotech-T in our example. Press Enter.
3. Press Enter to Input the password.
4. Use Control wheel to enter the WiFi password, and click OK after entering the password.
5. Press Enter again in Access Point Set.
6. IP Address Settings is Auto, press Enter again.
7. Sony Camera is Connecting… to Chicagotech-T WiFi.
8. If it is successful, Sony A7R is Registered on Chicagotech-T WiFi.
9. You can see the Wireless is active on the main screen.
Please view this step-by-step video:
To transfer images from Sony A1 camera, one of options is through WiFi connection with computers or mobile devices. This article will show you how to configure Sony A1 camera to connect a WiFi network.
1. Go to Menu>Network>Wi-Fi (35/51), and then press Enter on Control wheel.
2. On the Wi-Fi, select Access Point Set (36/51)
3. In Access Point Set, select your WiFi, for example Chicagotech-T and press Enter.
4. Press Enter to Input the password.
5. Use Control wheel to enter the WiFi password and click OK after entering the password.
6. Press Enter again in Access Point Set.
7. IP Address Settings is Auto, press Enter again.
8. Sony Camera is Connecting… to Chicagotech-T WiFi.
9. If it is successful, Sony A1 is Registered on Chicagotech-T WiFi.
10. To show the WiFi info, go to Network>Wi-Fi>Display Wi-Fi Info.
And you can check the Wireless is active on the main screen.
Please view this step by step video:
https://youtu.be/U8uHEI6mlbA
Many people have report the sensor of the viewfinder (EVF) has a problem with Sony A7 generator 1 and 2. “If you want to use its LCD finder on the back, and hold the camera down at waist level, which in many cases shades the camera’s eyepiece sensor heavily, the sensor within the EVF’s rubber hood thinks the camera is being held to your eye and turns the LCD completely off in favor of the EVF only”.
Resolution 1: Clean the the sensor of the viewfinder.
Resolution 2: Customize a key to disable auto-toggle between monitor and EVF by going to:
“MENU > Gear > Finder/Monitor” and set it to “Monitor (Manual)”.
Resolution 3: Quoted: “
I finally discovered a simple fix to remedy this very aggravating situation using a product called Light Dims, which are little inexpensive, stick-on pre-cot pieces of a neutral gray shading material actually made for putting over glaring, bright LED’s that are overly bright and irritate you at night or in dark places.
By simply cutting a 3mm X 5mm piece of this material and applying it over the left half of the EVF sensor window, the sensor functions perfectly and the LCD remains on even in very low light, plus the EVF still switches on again automatically when the camera is held up to your eye! This is an incredibly simple fix that many Sony a7 users have wrestled with for months and have hoped and hoped that Sony would correct via a firmware update! It seems to work for all the Sony a7 models including the a7, a7R, a7II and a7S. These little gadgets are available on Amazon (http://www.amazon.com/LightDims-Original-Strength%C2%AE-Minimal-Packaging/dp/B00CLVEQCO/ref=sr_1_1?ie=UTF8&qid=1428490110&sr=8-1&keywords=lightdims) or directly from the company at: www.lightdims.com”
2. Select Media and press Center key.
3. Select Format and press Center key.
4. Select the Slot t format and press Center key.
5. Press Enter to Performs Quick Format.
6. It starts formatting memory Card…
Note: The quick is just press and hold MENU while pressing the trashcan button
Please view this step-by-step video:
https://youtu.be/2eJktgVFSdw
2. Press enter
3. Select Calibrate. That will turn off Low Tire Pressure Light.
Please view this step by step video:
With Sony A7 camera, when you bring the camera to your eye, a dedicated sensor on top of the EVF (eye sensor) can disable the monitor and activate the viewfinder automatically. When you move the camera away from your face, the viewfinder is disabled and live view goes back to the LCD screen. Here is how to turn off the Viewfinder on the Sony A7 camera.
2. Press OK
3. Select Monitor (Manual) and press OK. The EVF is disabled and you can only use the rear LCD screen.
2. 发牌前要翻过来一张牌,谁拿到了就是地主(得一份)。 地主不要,接下来的也不要,那么尾家就必须要牌,于是尾家就成了新地主。首轮地主由系统选出(翻牌),以后每轮按顺序 做地主 。 也可以叫牌, 后叫牌者必须叫更高的分,比如第一个叫牌得两分,第二个叫牌的三分。
3。 地主可以拿最后的三张底牌。
4. 最大的牌就是王炸,小王和大王 一起出 ,别人出什么牌都可以用王炸。第二大就是炸弹,需要4张一样的牌。 顺序为3333<4444<5555<6666<7777<8888<9999<10101010<JJJJ<QQQQ<KKKK<AAAA<2222。
5. 飞机带翅膀就是说手上要有三个一样的牌两队就是飞机,比如QQQKKK或555666就是飞机,翅膀就是可以任意带上两只单牌一起出 。飞机带翅膀:三顺+同数量的单牌(或同数量的对牌)。如: 444555+79 或 333444555+7799JJ。 四带二:四张牌+两手牌。(注意:四带二不是炸弹)。如: 5555 + 3 + 8 或 4444 + 55 + 77 。
6. 连对就是对子连起来,至少要有三对才能出连对,连对如,334455,991010JJ,QQKKAA就是连对。
7. 连牌就是要五张以上相连才叫连牌,如34567,8910JQKA。对方出34567,自己打的话就要有45678或10JQKA才可以出牌。
8. 单牌就是单张出牌为单牌,最大就是大王,小王,2,A,K,Q,J,10,9,8,7,6,5,4,3.
9. 对子、单张都可以出牌。
10. 决定胜负。如果你是地主,你的牌先出完你赢。如果你是农民 ,那么你和另一个
农民中任何一个人的牌比地主先出完,那就是你们赢